The National Health Commission of the People's Republic of China (NHC) has published Notice No.1 of 2023 to approve 11 kinds of substances for food contact materials and articles. This notice has already come into force. The usage conditions of the substances are shown as follows:
A. New additive of food contact material and article
Items | CAS No. | Scope | Maximum amount to be used | Specific Migration Limit (SML)/ mg/kg | Max Residue (QM)/ mg/kg | Note |
Cyclohexane, 1,1'-methy lenebis[4-isocyanato-, homo polymer, cyclohexy lamine-terminated |
315207-86-4 | Plastic: Polycyclo hexane dimethylene naphthalate (PCN) |
0.35 | ND [1,1'-methy lenebis(4-isocyanatocy clohexane), DL= 0.01mg/kg (as isocyanate); 0.05 (4,4'-ylidene dicyclohexy lamine) |
1 [1,1'-methy lenebis (4-isocyana tocyclo hexane), as isocyanate] |
- |
2-[2-(2,4-diamino-6-hydroxypy rimidin-5-yl) diazenyl]-5-methylben zenesulfonic acid |
1021701-36-9 | Plastic | 0.5 | 0.05 | - | The use temperature of plastic materials and products added with this substance shall not exceed 100°C, and shall not be used for the production of special food contact materials and products for infants and young children. The above-mentioned restricted use requirements shall be marked in accordance with the provisions of GB 4806.1. |
Methacrylox yethyl trimethyl ammonium chloride, itaconic acid, and N,N’-methy lenebis acrylamid |
214495-32-6 | Paper and cardboard | 1% (as dry weight) | ND (Acrylamide, DL=0.01mg/kg) |
- | Paper and cardboard materials and products to which this substance has been added shall not be used for irradiation, and the operating temperature shall not exceed 121°C. The above-mentioned restrictions and use requirements shall be marked in accordance with the provisions of GB 4806.1. |
B. Expansion of the scope of additive used in food contact material and article
Items | CAS No. | Scope | Maximum amount to be used | Specific Migration Limit (SML)/ mg/kg | Max Residue (QM)/ mg/kg | Note |
Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl) propionate | 2082-79-3 | Paint and coating | 0.5 | 6 | - | Coatings with this substance added shall not exceed 10 g/m2. The above-mentioned restricted use requirements shall be marked in accordance with the provisions of GB 4806.1. |
Napthalensulfonic acid, polymer with formaldehyde, sodium salt | 9084-06-4;36290-04-7 | Plastic: Acrylonitrile-butadiene-styrene copolymer (ABS) | 0.12 | 15 (as formaldehyde) | - | - |
Fatty acid esters of C1~C18 mono- and poly-fatty alcohols | - | Plastic | 0.1 | - | - | Plastic materials and products added with this substance shall not be used in the production of food-contact materials and products for infants and young children. The above-mentioned restricted use requirements shall be marked in accordance with the provisions of GB 4806.1. |
Silane, dichlorodimethyl-, reaction products with silica | 68611-44-9 | Adhesive (direct contact with food) Ink (indirect contact with food) |
Adhesive: 0.002% (as dry weight) Ink: 4% (as dry weight) |
- | - | Adhesives and inks added with this substance shall not be used in the production of special food contact materials and products for infants and young children. The above-mentioned restricted use requirements shall be marked in accordance with the provisions of GB 4806.1. |
C. New resin substance used in food contact material and article
Items | CAS No. | Scope | Maximum amount to be used | Specific Migration Limit (SML)/ mg/kg | Max Residue (QM)/ mg/kg | Note |
Carbon monoxide-ethylene-propylene terpolymer | 88995-51-1 | Plastic | Use as needed | - | - | Plastic materials and products added with this substance shall not be used in the production of food-contact materials and products for infants and young children. The above-mentioned restricted use requirements shall be marked in accordance with the provisions of GB 4806.1. |
4-ethylphenol, m-cresol, p-cresol and 4-tert-Butylphenol polymers with formaldehyde |
68957-28-8 | Paint and coating | 62% (as paint formulation) | 0.05 (p-tert-butylphenol); 15 (as formaldehyde) |
- | The use temperature of coatings and coatings produced with this substance as raw material shall not exceed 130°C, and shall not be used in the production of special food contact materials and products for infants and young children. The above-mentioned restricted use requirements shall be marked in accordance with the provisions of GB 4806.1. |
Polymer of ethylene glycol, 2,2-dimethyl-1,3-propandiol, terephthalic acid, isophthalic acid, adipic acid and itaconic acid | 1041633-99-1 | Paint and coating; Adhesive (direct contact with food) | 20% (as dry weight) | 30 (as ethylene glycol); 0.05 (2,2-Dimethyl-1,3-propanediol); 7.5 (as terephthalic acid); 5 (as isophthalic acid) |
Coatings and adhesives produced from this substance are only used for filling at room temperature and long-term storage at room temperature (including heat under the conditions of T≤70℃, t≤2 h or T≤100℃, t≤15 min. filling and pasteurization). The above-mentioned restricted use requirements shall be marked in accordance with the provisions of GB 4806.1. |
D. Expansion of the scope of resins used in food contact material and article
Items | CAS No. | Scope | Maximum amount to be used | Specific Migration Limit (SML)/ mg/kg | Max Residue (QM)/ mg/kg | Note |
Isophthalic acid, polymer with 1,3-benzenedimet hanamine and hexanedioic acid |
28628-75-3 | Plastic | Use as needed | 5 (as isophthalic acid); 0.05 (m-xylylenediamine) |
- | The thickness of the plastic film produced with this substance as raw material shall not exceed 50μm, and the operating temperature shall not exceed 121℃. The above-mentioned restricted use requirements shall be marked in accordance with the provisions of GB 4806.1. |
About Intertek
Intertek is a leading Total Quality Assurance provider to industries worldwide. Our network of more than 1,000 laboratories and offices and more than 100 countries, delivers innovative and bespoke Assurance, Testing, Inspection and Certification solutions for our customers’ operations and supply chains. Intertek Total Quality Assurance expertise, delivered consistently with precision, pace and passion, enabling our customers to power ahead safely.